Projects – Casoni

LTS 9000

casoni — Thu, 25 Jan 2024 16:18:29 +0000

The LTS-9000 is a system for UT inspection of rolled bars ranging from Ø18mm to Ø75mm. The UT check is performed by the ROWA UT instrument, installed in the central bench. The plant is divided into eight functional zones: – Lifting bench – 1st and 2nd loading belts – Infeed roller conveyor – Central bench – Outfeed roller conveyor – Goods unloading cradle – Short unloading cradle – Scrap unloading cradle Each zone has its own function, drives, sensors and safety devices, emergency functions and adjustments with respect to the intended and permitted use by the operator. The plant is equipped with a PLC-controlled pyramid safety circuit. The system complies with EMC regulations.

FOCUS ON CENTRAL BRENCH LTS-9000

casoni — Thu, 25 Jan 2024 10:47:19 +0000

The LTS-9000 is a system for UT inspection of rolled bars from Ø18 mm to Ø75 mm. The UT inspection is performed by the ROWA UT instrument, installed in the central bench. The system is subdivided into eight functional zones: – Lifting bench – 1st and 2nd loading conveyor – Infeed roller conveyor – Central bench – Outfeed roller conveyor – Goods unloading cradle – Short unloading cradle – Scrap unloading cradle Each zone has its own function, drives, sensors and safety devices, emergency functions and adjustments in relation to the intended and permitted use by the operator. The system is equipped with a PLC-controlled pyramid safety circuit. The system complies with EMC regulations.

UTS-V

casoni — Thu, 25 Jan 2024 10:15:33 +0000

Motorised bench for loading automotive valves to be inspected with automatic pick and place and part rejection system.

Charger of EQ-SHAFT OMS

casoni — Thu, 25 Jan 2024 10:13:46 +0000

Bench for loading cylindrical automotive parts with automatic part rejection system on conveyor belt

UTS-8000

casoni — Thu, 25 Jan 2024 10:12:31 +0000

Central motorised wheeled zone for ultrasonic billet inspection system, maximum load capacity 10,000 kg.

UTS-BARS2

casoni — Thu, 25 Jan 2024 10:06:28 +0000

The UTS-BARS2 is a system for the ultrasonic control of round bars in the pass, the system is to be integrated into existing production lines, the system consists of four main modules that are interchangeable and manually adjustable depending on the requirement and the diameter of the unit to be controlled: the 4SW module for the transverse control of the sections, the 6V module for the centred control of the section and two encoder modules for the opening and closing of the control adjustable in height to map the length of the unit.

Charger of UTS-3000 ALMAG

casoni — Thu, 25 Jan 2024 10:05:47 +0000

Motorised pick and place system on static loading table with workpiece detection system and automatic rejection system.

USIP|xs

casoni — Thu, 25 Jan 2024 09:23:47 +0000

As the successor to the USIP 40 multi-channel defect detector, the newly available Krautkrämer USIP|xs CV solves a growing need for easy and cost-effective integration. The improved multi-instrument architecture helps optimize automation capabilities and provides more interfaces and flexibility. The USIP|xs CV can be integrated into any automated and semi-automated inspection system. With different T/R specifications and a multitude of channel configurations, the instrument is scalable in terms of both performance and associated costs. As a result, it is suitable for a wide range of applications and system sizes, such as Quality Control, Print Control, and R&D.

HYDRASTAR

casoni — Thu, 25 Jan 2024 09:23:06 +0000

Krautkrämer HydraStar is a complete turnkey platform, available in single- or dual-robot configurations with optional linear slides and turntables to inspect a wide variety of part geometries. Waygate Technologies designs composite inspection systems to meet the most demanding inspection requirements with very high production speeds, so you can inspect parts at speeds that keep pace with your industry.

ROKSTAR

casoni — Thu, 25 Jan 2024 09:22:44 +0000

Icon a unique design, Krautkrämer RokStar provides improved stability as the scanner moves. The scanner moves on two steel beams in the primary X direction. All other axes are indexed interpolating axes. For scans of complex 3D parts, the machine uses an additional trigger axis to ensure equidistant data acquisition along the entire scan path. Individual mechanical test designs and options, such as rotary table, defect markers, custom tool sets, etc., are available to meet different part inspection needs.